I have a confession….I heart Valentine’s Day in all of its ridiculous glory. I love the blatant pinks and reds and hearts and sparkles and chocolates and redundant red roses. It’s all just so darn cute and girly, and I embrace it and accept it despite its pathological commercialism. I’m really an enormous sucker for some adorable packaging no matter what.
Another thing I secretly love? Those super-cheesy heart-shaped boxes of chocolate. You know the ones in the drug store, just to the left of the shampoo aisle? Yes, those! It isn’t so much about the chocolate (I swear), as it is about that nostalgic heart-shaped box:
After the chocolates have evaporated, what does one do with such an adorable box? At my house, you fill it with flowers, of course!
First of all, you can do this arrangement in either the lid or the bottom (or both!). I chose the bottom, which had built-in candy compartments that had to be gently ripped out, first.
Now, because this is a cardboard box, we gotta waterproof it. You need to line it with some sort of thick-gauged plastic lining, whether it be a bit of garbage bag, ziplock, etc. I happened to use a piece of some left-over painter’s tarp. Cut it roughly to size with a little bit of overlap.
Push the plastic lining into the box, and then, using your trusty glue-gun, run a bead of glue, bit by bit, along the top edge of the box, adhering the plastic just well enough so that it sticks, not so well that it melts through the plastic (which if you are using sturdy enough plastic and a low-heat gun, shouldn’t be a problem). This doesn’t have to be a perfect, solid bead of glue–just enough to hold the plastic in place.
Under normal circumstances, this is where I would cut and fit wet florist’s foam into the container. Lately, I have been trying to steer away from using the stuff unless I just have no choice–it’s really rather environmentally unfriendly. But this is a personal choice and I chose to go without. Instead, I cut and fit a double-layer of paper towels into the bottom of the heart, then filled it about half-way with water. The paper towels serve as a grip for the roses, and also to keep things damp with minimal water (as this is a shallow container and you don’t want a ton in there sloshing around).
The flowers might tip over a bit as you work–don’t worry, the more you get in there, the more they hold each other upright.
Now, you’ll probably be able to still see a bit of plastic liner around the edges. We’ve got to do something about that! I chose this adorable lacey, felt ribbon to edge the box in, but any ribbon or trim will work.
Pick your poison:
And then literally blow it like fairy dust across your flowers. If you don’t like glitter everywhere in your house (then you have no soul! Just kidding….kind of), please do this step outside!
Now, you just want to top the whole thing off with a nice, diagonal bit of ribbon and a tailored bow to mimic the way these candy boxes are usually trimmed out. Cut a piece of your trim ribbon to fit across one lobe of the heart, anchoring each end of the ribbon to the inside upper edges of the box with hot glue (so that the glue and ribbon ends don’t show above the trim).
I adore the red-on-red-on-red monochrome of this presentation, but it would be so cute done up with some different colors thrown in there, as well. I may have to do up a pink version using the left-over lid!